TY-9510 Type Photoelectricity Direct Reading Spectrometer

1.Sample analysis of various alloys 2.Multi- passageway 3.High-energy spark advance technology 4.FOB Shanghai

Main technical parameters:

TestBase (Multi -base): Al,Cu,Ni,Co,Mg,Ti,Zn,Pb,Sn and Ag, etc. sample analysis of various alloys.

Analysis Passageway (Multi- passageway): can extend to 45 passageways.

Analysis Waveband (Wide extent): 200nm~650nm

Testing Time (Short time): on the basis of different sample type, usually less than 30s.

Optics Room (Refined and constant temperature): 38°C ± 0.2°C

Power Source: protective grounding single-phase power source. Voltage: 220VAC      Frequency:50Hz Service power: 1.8KVA

Environment Condition: working temperature: 10-30°C

storage temperature: 0-45°C humidity: ≤85%

Argon gas: purity 99.000%.

Main allocation and characteristics:

1. The optical system adopts blazed holographic grating, which improve the analysis accuracy and detection sensitivity of the instrument.

 

2. The optics room and electronic system are equipped with constant temperature device, which can avoid the influence of the wave of external ambient temperature to the stability of the instrument.

3. Adopt the integral exit slit, with the advantage of speediness, convenience and accurate of optical system. The exit slit area reserve slit to increase the analysis passageway for users.

4. One-way discharge, high-energy spark advance technology, discharge parameters is adjustable, computer control.

 

5. Finish the tracing automatically through operating software. Show by curve, can read the location of peak intuitively, accurately and fastly with the advantage of tracing simple and convenient, operating quickly. The precision is within ±5um.

6. Software function is all in readiness, simplicity of operation, working reliable. Analyzing the component content of testing samples accurately and fast through prefabricating the work curve in the interior of the instrument.